Ideally suited for pressing and bundling of folded sheets (signatures), brochures, Book- Blocks etc. for Perfect and Hard-Case Binding process. The Hydraulically pressed bundles preserve the fresh/crisp look of the print as it prevents air & dust from spoiling the folded sheets(signatures). 

A process of reducing/knocking out the SWELL in the spine of thread-sewn Book-Blocks or gathered folded-forms (signatures) being prepared for Hard-Case or Soft Cover Perfect Binding. Ensures the Book-Blocks are rectangular in shape and free from extreme gradients in the folded/sewn area for quality and enhanced life of the BOOK

Smashing is the process of compressing and removing the air from the folds and flattening of the Overall area of the Book-Blocks. Smashing strokes can be set in multiples to suit the compacting requirement for the desired rectangular shape. After the Smashing cycle the Book-Block is held firmly and Nipping operation follows for knocking out the excessive swell in the spine.

Book Spine Pre-Gluer equipped with Hot Air IR Dryer, is the most economical system for preparation of Book-Blocks suitable for Soft or Hard Case Binding by pre-gluing and drying of section-sewn, pre-smashed and nipped signatures. The process ensures that the Book-Blocks maintain its rectangular shape, which is free from extreme gradients in the folded sewn area. 

JA commitment to the Binding (Post-Press) industry, for providing off-line economical dedicated solutions for preparing and finishing Book-blocks for soft/hard cover requirement; is further extended by adding Booklet Three Side Trimmer to the range. Semi-automatic Three Knife Trimmer with manual feeding of Booklets to meet the demand of higher production with maximum operator efficiency and safety.

JA  contribution to Book-Block preparing is well acknowledged by the binding fraternity. Rounding & Backing is yet another milestone in our endeavour to continue our efforts in finding solutions for Book-binders. Rounding & Backing is the most important requirement in Hard-cover Binding Process to withstand heavy stresses with the help of structural shape similar to architectural curvilinear form identical to Roman Arch

NIPPING-the process of reducing / knocking out the Swell in the spine of: Thread-sewn Book-Block or gathered/collated folded-forms (signatures) being pressed for Hard-case or Soft Cover / Perfect Binding. SMASHING-the process of removing the air from the folds and flattening the overall area of the Book-Blocks.

Pressing of cased-in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Spine of Book-Blocks.These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300/400kgs to achieve the desired results.

Hydraulic Book Press TBP-II with two independent stations with fixed Pile Height upto 400mm. The printed title can be pasted on open book or board to board size up to 810x525mm with single Platen & day-light area upto 400mm.The press can be used either in Manual or Auto-Mode with each station alternatively or together, resetting to loading position after pre-set time. The option to set time on a Digital Timer in Seconds (from 001 to 999).

Hydraulic Book Press designed specially for Exercise Note Books/stationery Manufacturers. The platen area adequately covers 3-Up or 4-Up Exercise Note Books. The printed title can be pasted on open book-size upto 800x500mm / 1040x650mm with daylight area upto 260mm on both upper & lower decks-alternatively.Moving on both the sides and the Upper & Lower Fixed Base Platen are equipped with stainless steel plates for best results.

Ideal Round Cornering Machine for rounding of Catalogues; Books; Exercise Note Books; Diaries and other Stationery articles etc.Heavy duty hydraulic Twin Corner Cutting Press can be fitted with different Tools (Dies) with radius ranging from R-3 to R-14 mm. Each set of cutting tools consist of two parts: an upper blade to be fitted to the Moving Platen and the lower Die to be fitted in a special slot on the working platform.

Book Spine Pre-Gluer equipped with Hot Air IR Dryer, is the most economical system for preparation of Book-Blocks suitable for Soft or Hard Case Binding by pre-gluing and drying of section-sewn, pre-smashed and nipped signatures. The process ensures that the Book-Blocks maintain its rectangular shape, which is free from extreme gradients in the folded sewn area. 

Hydraulic Press for handling of WASTE-Paper, Corrugated Boards, Stationery (sharedded / Un - sheddded). Plasti / Flims etc. Hydraulic device, compact in design, ideally suited for the pressing of said WASTE and manually bundling the presssed bales for saving in storage space, transportation and manpower.Easy simple operation of handling waste by sinlgle person.

Table Top Glue Applicator for een spread of adhesive at a considerable saving of conumption upto 40% approximately. Suitable for PVA, Cold Glues in general and Hot Animal Glue upto 60^oC to 70^oC. Glue heating by radition through a thermostat control. Glue control through micrometeric scraper roller.Paper, Cloth, Buckrum & PVC etc upto 400gsm or 1mm thick meterial can be glued.

Keeping the variegated requirements of customers in mind, we are engaged in providing Paper Cup Forming Machine. Our Paper Cup Forming Machine is suitable for making Cups from Single PE Coated Paper where the size ranging from (40 ml) to (330 ml) and Double PE Coated Paper where the size ranging from 6 oz (170 ml) to 32 oz (1000 ml) with speed ranging from 45-55 cups per minute. 

We are leading manufacturer of the broad array of Flat Bed Screen Printing Machine. This equipment is widely used for screen printing purposes all over the nation. Our product is uniquely designed and developed by our team of qualified engineers, using premium quality raw material in order to instill in it, globally set quality standards. Our products can be availed by us within stipulated time-frame at market leading rates

Twin-Deck Coater Series One stop multi functioned offline coater from the pioneer of off-line drip-off technology based on rugged, high speed Heidelberg platform and a well established eco-system for operators/ spares/ service etc. Fully loaded versions offer CDB Anilox Coater, EPS based Interdeck UV and conveyorised UV+Hot Air Driers with auto sheets staking. The machine is designed and built for heavy Duty round the clock operation for handling medium to high volumes offering great flexibility of various coatings Like Drip-Off, Spot UV/ Aqueous, Primer coatings and many more.

• Easy to operate
• Longer Lamp Life
• Auto UV hood raise for fire safety
• EPS Power Pack optionally available
• Lower Electricity Consumption upto 15%
• Suction Hold Down for uniform Paper Travel
• Designed using advanced design technology
• Over 1000 plus installation in India and abroad
• Auto Hibernation system for power saving in idle condition

• Specially designed for Sheet-fed presses, Flexible design for different Presses.
• Shuttered UV lamp head.Ratings: 120- 200 watts/cm.
• Di-Chroic coated COLD MIRROR for heat sensitive substrates available as optional upgrade.Minimal heating of the substrate and press due to enhanced water-cooling and excellent heat management (Eight water channels dissipating heat)

Three Knife Trimmer Machine has been specially designed for the trimming of both hard and soft cover books. Trimmer is available in Auto Fed versions. In trimming station, the product registered from the spine are precisely positioned and are pressed prior to being trimmed.

We offer our clients with a qualitative range of Knife Grinder Machines. These are ideal for grinding the knife of veneer lather machines. Our range is available in the models 56" and 108" with extra heavy duty MS fabricated body. The slides of our machine are made from quality cast iron and have a knife holder for facilitating accurate working with quality sharpening of blades.

We are one of the well known manufacturers of a quality range of Paper Wireo Locking Machine that is fabricated using high grade raw material. The compact design machine is available in various sizes and shapes. It is capable of adding strength to the material and binds a large number of papers.

To meet various needs of consumers, our firm is offering Business Card Cutter. These cutters are reliable and easier to use due to light weight. Made of best input, these cutters are light weighted and remain sustained for many years. Moreover we charge minimal price for these cutters